+91 (022) 2593 2153
mail@novasteels.com
Products
M. S. Angles
This is a structural material with cross section of 90 degree angle. The dimension is determined by the length and the thickness of the two sides. If the lengths of the two sides are equal, it is equal angle, otherwise it is unequal. It is used in all construction activity. Sizes available are as follows:

1. Equal Angles : 20 * 3 upto 200 * 20 mm

2. Unqual Angles: 45 * 30 * 5 upto 150 * 115 * 12 mm

Also available M.S.'T' Angles in different sizes.
M. S. Flats
Flats are basically thin strips of mild steel with the thickness of the strip varying commonly from 3mm to 25mm.

Sizes are also available: 12 * 3 upto 200 * 50mm
M.S. Rounds
As the name suggests, this product has a circular cross section. It is referred in terms of the diameter of the circle.

Sizes available: 75 * 40mm
M. S. Channels
Channel has a cross section as shown in the picture. It is referred by the dimension of the horizontal part to the vertical part.

Sizes available: 75 * 40mm upto 400 * 100mm Also available is the Tele Channel (41 * 32mm).
H.R. Black Sheets
These are thin sheets which come in thickness ranging from mainly 1.25mm to 4mm. The most common width available is 1250 mm. These mainly come in form of coils and the length can be sheared to desired dimension. Sheets are used to form big storage tanks, for centering and for automobile bodies.
Pipes
Pipe is a term generally used to designate a long hollow body used for conducting gases or liquids such as water, fuel, gas, steam, oil etc. Pipes are also used for erection, scaffolding, drainage, water supply and other structural & mechanical uses.

Pipes are broadly classified as M.S. G.I. C.I. Pipes (as per finish & Form). Further, they could be wither seamless, ERW (Electric Resistance Welded), SAH (Submerged Arc Helded) and SW (Spiral Welded). Pipes are supplied as per IS 1239 & IS 3589.

Hollow Tubes and Box Sections are also available.
M.S. Beams
Beams are generally used for structural purposes, supports to heavy plant, equipments & general Fabrication works. Beams are referred by the dimensions of the web & Flange of the beam. Generally available in length varying from 10 to 12 meters.

Sizes available: 100 * 50 upto 600 * 210mm
M.S. Plates
Plates are generally used for Fabrication, structural purposes, for making tasks, Pressure Vessels etc. and generally fall in the categories of either carbon steel or Alloy Steel. Plates are available in standard width of 1250mm which may go upto 3000mm. Thickness available from 5mm upto 80mm.
Re-inforcement Steel
These used manly for re-inforced concrete work for housing, construction of dams, bridges, roads, building & factories etc. These are ribbed bars, generally categorized as per origin (make), design & chemical, Mechanical properties, viz.):

i] CTD Bars: Cold troisted & deformed bars available as per IS 1786, Fe 415 from 8mm upto 32mm.
ii] Tor 40: As per Grade 40, available from 8mm upto 32mm
iii] TMT Bars: Thermo mechanically treated bars, manufactures by Temp cone process. Available as per IS 1786 standards from from 8mm upto 40mm. They are further available in standard Fe 415 & Fe 500 Grades & also CRS (Corrosion Resistant) Grades as per Fe 415 & Fe 500.